Easy Mounts or Cradles for Cell Phones, Handhelds & Tablets

Whether you’re driving a tractor or combine, grain truck or just going down the road in your pickup, you need both hands on your controls and not fumbling with your cell phone or handheld computer. We sell RAM cradles and mounts that give you easy access to your device but stand on their own. This is just a sampling of the many options we have to offer so give us a call, tell us what vehicle you drive and what you want within easy reach and we can get you set up.

New! Ram X-Grip for your Cell Phone or Tablet!

The new RAM X-Grip III™ line of products just got bigger and better. This new model is just what you’ve been looking for to hold your favorite tablet. Just like the devices it was made for, it is everything you need and nothing you don’t. Simple to open and close, the spring loaded RAM X-Grip III™ leaves the outside edge of your tablet almost completely free of annoying obstructions. Soft rubber fingers apply just enough force to keep your tablet in safe and secure. Compatible with a wide range of mounting solutions, your tablet is sure to find a home no matter where your travels take you.The RAM-HOL-UN9U consists of a composite spring loaded holder, expandable grip arms and additional bottom support keeper. Included are extra easy access grip knobs, located on the back of the holder for quick release of your tablet. The RAM-HOL-UN9U expands and contracts for perfect fit of most 10″ tablets with or without sleeves, as well as some smaller tablets. Please verify dimensions of your tablet below for compatibility with the X-Grip III™.

Sometimes, its all about the design. If you are looking for a compact mount for your cell phone without that cookie cutter shape, you’ve found it. The RAM X-Grip™ has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The perfect compliment to the modern sleek interior of today’s vehicles, the RAM X-Grip™ is the cell phone holder evolved. Compatible and interchangeable with a wide range of popular RAM Mounting products, this elegant holder is ready to compliment your phone and become the most useful accessory in your vehicle.

Compatible Devices:
Apple iPhone 5 WITH OR WITHOUT CASE/SLEEVE
Apple iPhone 4S WITH OR WITHOUT CASE/SLEEVE
Apple iPhone 4 WITH OR WITHOUT CASE/SLEEVE
Apple iPhone 3GS WITH OR WITHOUT CASE/SLEEVE
Apple iPhone 3G WITH OR WITHOUT CASE/SLEEVE
Apple iPhone WITH OR WITHOUT CASE/SLEEVE
Apple iPod touch (All Models) WITH OR WITHOUT CASE/SLEEVE
Apple iPod (G1-G5)

The X-Grip™ holder is compatible with handheld devices that will fit the dimensions listed below. It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.

Holder Dimensions:
Minimum Width = 0.875″
(Devices at 0.875″ must be a minimum of 4″ in height to fit into holder)
Maximum Width = 3.25″
Depth = 0.875″

Features:
1. Rustproof
2. High strength composite and stainless steel construction
3. Spring loaded holder expands and contracts for perfect fit of your device
4. Rubber coated tips will hold device firm and stable
5. Versatility of holder allows for attachment to many RAM ball mounts
6. Lifetime warranty

Material:
High Strength Composite, Rubber Tips and Stainless Steel Construction

Ball Size:
1″ Rubber Ball “B” Size

Note:
The “U” in the part number reflects product packaged in poly bag.

_____________________________________________________________________________________________________________________________

The RAM-B-166-UN7 consists of a 3.25″ twist lock suction cup base, double socket system and universal spring loaded X-Grip™ holder for cell phones. The suction cup, twist lock base is designed to have a strong hold on glass and non-porous plastic surfaces, including RAM adhesive disks. The mount is designed with a RAM 1″ diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The included X-Grip™ cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip™ holder expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect compliment to the modern sleek interior of today’s vehicles, the RAM X-Grip™ is the cell phone holder evolved.

Holder Dimensions:
Minimum Width = 0.875″
(Devices at 0.875″ must be a minimum of 4″ in height to fit into holder)
Maximum Width = 3.25″
Depth = 0.875″

Features:
1. Rustproof
2. High strength composite and stainless steel construction
3. Spring loaded holder expands and contracts for perfect fit of your device
4. Rubber coated tips will hold device firm and stable
5. Single socket technology allows for multiple adjustment angles and articulation of device
6. Lifetime warranty

Material:
High Strength Composite, Rubber Tips, Powder Coated Marine Grade Aluminum and Stainless Steel Construction

Ball Size:
1″ Rubber Ball “B” Size

Note:
Part number reflects product packaged in clear clam shell for store shelf display.

_____________________________________________________________________________________________________________________________

RAM-A-CAN II™ Universal Cup Holder Mount with Universal X-Grip™ Cell Phone Holder

RAP-299-3-UN7BU

Buy RAP-299-3-UN7BU RAM-A-CAN II™ Universal Cup Holder Mount with Universal X-Grip™ Cell Phone Holder –

Call for price

The RAP-299-3-UN7BU consists of the RAM-A-CAN™ cup holder base, double socket system and universal X-Grip™ holder. The mount is designed with a RAM 1″ diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm; this allowing for almost infinite adjustment and perfect viewing angles. The included X-Grip™ cradle has a clean and clever four leg design that sports great holding power without hiding your phone behind foam pads and plastic. The spring loaded X-Grip™ holder expands and contracts, allowing for a perfect custom fit of your cell phone. The perfect compliment to the modern sleek interior of today’s vehicles, the RAM X-Grip™ is the cell phone holder evolved.

Holder Dimensions:
Minimum Width = 0.875″
(Devices at 0.875″ must be a minimum of 4″ in height to fit into holder)
Maximum Width = 3.25″
Depth = 0.875″

Features:
1. Rustproof
2. High strength composite and stainless steel construction
3. Spring loaded holder expands and contracts for perfect fit of your device
4. Rubber coated tips will hold device firm and stable
5. Socket technology allows for multiple adjustment angles and articulation of device
6. Lifetime warranty

Material:
High Strength Composite, Rubber Tips and Stainless Steel Construction

Ball Size:
1″ Rubber Ball “B” Size

Note:
The “U” in the part number reflects product packaged in poly bag.

_____________________________________________________________________________________________________________________________

Get the most out of your iPad with the RAM Tab-Tite™ spring loaded, quick release cradle. With interchangeable cup ends, you can fit the cradle to your iPad for a near custom fit. This spring loaded design makes it easy to load and unload your iPad, along with keeping it secure while on the go. Cup ends are designed to optimize the functionality of your iPad, allowing access to audio jacks, usb, power, and other ports, your iPad can be used just as it was intended. Perfect for stationary or on the go applications, this new RAM product is just what you need to get the most out of your iPad.

The RAM Tab-Tite™ is compatible with the following tablets:
Apple new iPad (3rd Generation) WITH OR WITHOUT CASE, SKIN OR SLEEVE
Apple iPad 2 (2nd Generation) WITH OR WITHOUT CASE, SKIN OR SLEEVE
Apple iPad 1 (1st Generation) WITH OR WITHOUT CASE, SKIN OR SLEEVE
HP TouchPad WITH OR WITHOUT CASE, SKIN OR SLEEVE

Features:
1. Support cups contain open slots to accommodate for devices of various sizes, including tablets in protective sleeves
2. Back plate can support various size support cups
3. Spring loaded tension provides secure support for your tablet
4. Spring loaded cradle allows for quick release of your tablet
5. Full access to all ports

Cradle Dimensions:

Height: 8.5″ minimum to 10.75″ maximum
Width: Maximum to 7.75″
Edge Depth: Maximum to 0.56″

Material:

High Strength Composite

Note:

The “U” in the part number reflects product packaged in poly bag. Hardware included to attach to mount. The RAM-HOL-TAB3U is not compatible with the Apple iPad WITH LIFEPROOF CASE.

_____________________________________________________________________________________________________________________________

This RAM high strength composite cradle is designed to hold the following devices:
Trimble Recon

Material:
High Strength Composite

Note:
The “U” in the part number reflects product packaged in poly bag. The cradle includes a set of four nuts and bolts to connect the cradle to any of the RAM compatible mounts. RAM cradles do not include the RAM-B-202U (Round Base & Ball), required to attach to the cradle and RAM mounting system.

_____________________________________________________________________________________________________________________________

The RAM Composite Universal Finger Grip™ Holder is designed to hold a large amount of cell phones and electronic devices. The holder comes with (3 sets) of four flexible rubber coated fingers placed along sides to grip your device. The fingers open by squeezing the ends to open the small finger arms. The bottom of the holder includes a back plate that adds support to the device being held by the mount. The perfect solution that is the best phone mount, car mount, motorcycle mount and can be used with several other phone accessories including samsung accessories and lg accessories. The spine plate contains the universal AMPs and 1.5″ x 2″ hole patterns.

This mount is designed to hold the following devices:
Cell Phones (check measurements below for dimensions)
2-Way Radios
GPS Devices
Works with OtterBox (Defender, Commuter, Impact) Cases, Phones with Bumper, Twisted Metal Case and More
Perfect rugged solution for the Blackberry, HTC Evo, Droid X, iPhone, and More
Use on your Motorcycle, ATV, UTV, Car, Boat and More

Height Dimensions:
Minimum with Top and Bottom Plates: 5.25″
Maximum with Top and Bottom Plates: 6.0″
The top and bottom plates can be removed for larger devices.

Spine Plate Dimensions:
3″ Width x 3″ Height

Using Short Arm Side Clamps:
Maximum Depth: 0.75″
Minimum Width: 1.25″
Maximum Width: 3.0″

Using Medium Arm Side Clamps:
Maximum Depth: 1.25″
Minimum Width: 1.5″
Maximum Width: 3.5″

Using Long Arm Side Clamps:
Maximum Depth: 1.6″
Minimum Width: 2.25″
Maximum Width: 3.5″

Material:
High Strength Composite

Note:
The “U” in the part number reflects product packaged in poly bag. RAM holders do not include the RAM-B-238U(Diamond Base & Ball) or RAP-B-238U (Diamond Composite Base & Ball), required to attach to the holder and RAM mounting system.

_____________________________________________________________________________________________________________________________

COLOR:	Black Powder Coat
BALL SIZE:	1 Inch Rubber Ball
MATERIAL:	Powder Coated Marine Grade Aluminum

Easy Mounts or Cradles for Cell Phones, Handhelds & Tablets

Buy RAM-HOL-UN7BU Universal X-Grip™ Cell Phone Holder with 1″ Ball. Requires additional arm and base.

Call for price

Call for price

RAM-A-CAN II™ Universal Cup Holder Mount with Universal X-Grip™ Cell Phone Holder

Call for price

Call for price

Call for price

Call for price

Call for price

Call for price

Call for price

Call for price

Call for price

Martens Farms Return Policy

Ram Mount Return Policy

Leave a Reply Cancel reply